Loading ...
Loading ...
Loading ...
DJI Osmo Pocket 3
User Manual
16
©
2023 DJI All Rights Reserved.
Gimbal Startup
Direction
Set the direction the camera faces when powered on.
Forward: the camera will rotate and face away from the user.
Backward: the camera will rotate and face toward the user.
Last Setting: if the gimbal mode is set to Follow or Tilt Locked,
the camera will face forward or backward. If the gimbal mode
is FPV, the camera will rotate to resume the same orientation
when powered o last time.
Rotate screen to power
o
If enabled, the camera can be powered off by rotating the
touchscreen when not recording.
Sele Flip Enable to obtain a better selfie effect by mirroring the image
automatically.
OTG Connection Tap OTG Connection to connect the handheld gimbal camera to
the Android device with the Type-C to Type-C PD cable (included).
When connected, view and transfer photos and videos via the
device album or le management. Note: OTG Connection is only
available when the Android device supports OTG connection.
Wireless Connection Tap to check wireless information, select Wi-Fi frequency, and
reset the Wi-Fi connection. Connect the device to DJI Mimo
wirelessly to update the rmware version.
Wearable Mode After enabled, the camera will rotate and lock in the sele mode
and the gimbal mode will change to Tilt Locked.
Tap twice on the screen to recenter the gimbal. Swipe up to exit
Wearable mode. In Wearable mode, it is recommended to use
the gimbal camera together with the Osmo Pocket 3 Expansion
Adapter (not included) to get a better rst-person view shooting
experience.
Gimbal Calibration Tap and conrm to calibrate the gimbal. Calibration can reduce
gimbal drift caused by human error or nearby magnetic
interference. DO NOT hold the gimbal camera during calibration.
Make sure to place it on a stable and at surface.
Joystick Speed Set the zoom speed and gimbal rotation speed controlled by the
5D joystick. A higher value means higher response sensitivity.
Video Compression Tap to congure the video coding format. Eciency (HEVC) is the
default value. Compatibility (H.264) can be selected. If Eciency
is selected, videos will be encoded in HEVC with a smaller file
size. If Compatibility is selected, videos will be encoded in H.264
with higher compatibility.
Sounds Tap to set volume.
Grid Tap to display grid lines in live view photos or videos to help
level the camera vertically and horizontally.
Loading ...
Loading ...
Loading ...