Loading ...
Loading ...
Loading ...
68
Figure 5-31 Global setup
Step 2 Select the channel.
●
Select
1
in
Channel
to configure the rule for the visible channel.
●
Select
2
in
Channel
to configure the rule for the thermal channel.
Step 3 Select a preset in
Preset
bar.
The Camera turns to the position.
Step 4 Add detected area and excluded area.
1) Click
Add Detect Region
to draw a detected area on the image. Right-click to end
drawing.
Click
Add Detect Region
again to re-draw.
2) Click
Add Exclude Region
to draw an excluded area on the monitoring image. Right-
click to end drawing.
●
Click
Delete Excluded Area
to delete the excluded area.
●
An excluded area takes effect only when it has been drawn in the detected area.
●
Multiple excluded areas can be drawn in the detected area.
Step 5 Click
Save
.
5.3.7 Configuring Auto Tracking
When an alarm is triggered in the detection region, the Camera automatically tracks the target
triggering the alarm for a period.
Prerequisites
You have configured
Alarm Track
on the
Rule Config
page. For details, see "5.3.5 Configuring
Intelligent Rules".
Procedure
Step 1 Select
Setting
>
Smart Thermal
>
IVS
>
Auto Tracking
.
Step 2 Select the tracking mode as needed.
●
Visible Track/Thermal Track: Select
Visible Track
or
Thermal Track
.
Loading ...
Loading ...
Loading ...