Loading ...
Loading ...
Loading ...
18
4.1.5 Laser Ranging
This function is available on the cameras with the laser ranging function.
●
The laser can cause permanent damage to human eyes and skin within safe distance. Keep the
Camera a safe distance away from humans while installing or operating the device.
●
Laser radiation can ignite flammables. Do not directly expose objects (excluding scattered or
absorber) to the laser beam, and do not place volatile flammables (such as alcohol) in the
working area of laser radiation products, to avoid producing laser beams or fire caused by sparks
from high voltage discharge.
Mind the distance during laser ranging. Less than 50 m will result in a damaged laser.
●
Laser ranging does not perform well to those objects (such as glass and marble) with strong
reflection ability. During laser ranging, select those objects with rough surface as your target.
●
Do not use the distance measurer to measure the distance of targets that are within 50 m of the
laser. The laser can permanently damage the device.
Log in to the web page, and then click
Start Ranging
. The Camera starts to measure the distance
from the object in the middle of the image to it (as indicated with the red cross sign).
4.2 PTZ
4.2.1 Configuring Protocol
If you want to use the external devices (such as network keyboard, NVR) to control the Camera, you
need to set the protocol to connect them to the Camera.
4.2.1.1 Configuring Network PTZ
Step 1 Select
Setting
>
PTZ
>
Protocol
>
Network PTZ
.
Step 2 Select the protocol that is matched with the Camera.
Figure 4-7 Configure network PTZ
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...