Loading ...
Loading ...
Loading ...
151
Step 2 Select the
Enable
checkbox.
Step 3 Configure NAS parameters.
Table 6-27 NAS parameters
Parameter Description
Server Address The IP address of the NAS server.
Remote Directory The destination path in the NAS server.
Step 4 Click
Save
.
6.3.3 Setting Record Control
Set parameters such as pack duration, pre-event record, disk full, record mode, and record stream.
Step 1 Select
Setting
>
Storage
>
Record Control
.
Step 2 Set parameters.
Figure 6-51 Record control
Table 6-28 Description of record control parameters
Parameter Description
Pack Duration The time for packing each video file.
Pre-event Record
The time to record the video in advance of a triggered alarm event.
For example, if the pre-event record is set to be 5 s, the system
saves the recorded video of 5 s before the alarm is triggered.
When an alarm or motion detection links recording, and the
recording is not enabled, the system saves the video data within
the pre-event record time to the video file.
Disk Full
Recording strategy when the disk is full.
●
Stop
: Stop recording when the disk is full.
●
Overwrite
: Cyclically overwrite the earliest video when the disk
is full.
Record Mode
When you select
Manual
, the system starts recording; when you
select
Auto
, the system starts recording in the configured time
period of record plan.
Record Stream
Select record stream, including
Main Stream
and
Sub Stream
.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...