Dahua TPC-SD2241-T Thermal Network Hybrid Pan & Tilt Camera Web3.0 Operation Manual V2.0.1

Loading ...

4.2.1.2 Configure Analog PTZ

Step 1 Select

Setting

PTZ

Protocol

Analog PTZ

Step 2 Select the

Enable

checkbox.

Figure 4-8 Configure analog PTZ

Step 3 Configure the parameters.

Table 4-4 Description of analog PTZ configuration

Parameter Description

Address The IP address of the Camera.

Baud Rate

Select the baud rate of the external PTZ camera.

Set the baud rate same with that of the controlling camera; otherwise

you cannot control the external PTZ camera through the Camera.

Data Bit It is 8 by default.

Stop Bit It is 1 by default.

Parity It is

NONE

by default.

Step 4 Click

Save

4.2.2 Configuring PTZ Functions

Select

Setting

PTZ

Function

The thermal image is displayed by default. Click or to switch the image between the

thermal and visible images.

4.2.2.1 Configuring Preset

Preset means a certain position that the Camera can make quick orientation to. It includes PTZ pan

and tilt angles, camera focus, and location.

Loading ...

Dahua TPC-SD2241-T Thermal Network Hybrid Speed Dome Camera