Dahua TPC-SD2241-T Thermal Network Hybrid Pan & Tilt Camera Web3.0 Operation Manual V2.0.1

Loading ...

Figure 5-62 Idle motion

Step 2 Configure idle motion.

1) Select the

Enable

checkbox to enable this function.

2) Select an idle motion and set idle time.

3) Click

Save

5.7.9 Configuring Heat Point Calibration

Find the obvious point according to the installation position of the Camera, and then set the

reference point and the calibration point. It is convenient to calculate the GPS position of heat point

through the heat point location algorithm in case of fire in the future. This function should be used

with a platform.

Prerequisites

●

Select a point or object that can be easily identified on the ground as a reference point.

●

When configuring reference points and calibration points, make sure that the camera resolution

is consistent with the resolution of the device in use.

●

During deployment, select four orientations to add reference points respectively (each reference

point can be configured with up to five calibration points). The more points are added, the more

accurate the heat point positioning is.

Procedure

Step 1 Select

Setting

Smart Thermal

Heat

Heat Point Calibration

Step 2 Add a reference point.

1. Click in

Reference Point

2. Select the visible channel, and then click the direction button to rotate the camera lens

to the reference point.

3. Double-click the reference point name, longitude, latitude and attitude to edit the

corresponding content, and then click .

Loading ...

Dahua TPC-SD2241-T Thermal Network Hybrid Speed Dome Camera