AR Blue Clean AR2N1 2050 Psi, 1.4 Gpm, 13 Amps Electric Pressure Washer

ASSEMBLY, CARE AND USE INSTRUCTIONS - Page 5

For AR2N1. Also, The document are for others AR Blue Clean models: AR 2N1-Q

PDF File Manual, 20 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
5
SAFETY INFORMATIONSAFETY INFORMATIONSAFETY INFORMATION
Double Insolated Product
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
25. Protect eyes, lungs, and skin from exposure to
detergent.
26. Warning-If connection is made to a potable water
system, the system should be protected against
backow.
CAUTION
Store the power washer indoors to prevent the
water in the unit from expanding under freezing
conditions. When the water freezes and expands,
your power washer will be damaged and become
inoperable. Or, if storing outdoors, it is
recommended you use pump saver (not included)
to protect pumps.
27. NEVER use hot water with your power washer. It will
overheat and damage the high pressure pump.
28. NEVER leave the power washer unattended while it
is powered “ON”.
29. ALWAYS turn the water supply on before turning the
power washer power to on. Running the pump dry
will cause damage to the internal components.
30. NEVER use a water supply to your power washer
that exceeds 150 PSI maximum.
31. NEVER disconnect the high pressure hose from the
power washer while the system is pressurized.
32. NEVER permanently engage the trigger mechanism
on the spray gun.
33. NEVER operate the power washer unless all
components are properly and securely connected.
34. NEVER allow the power washer pump to run for
more than one minute after you have turned off the
water supply. This can cause the motor and pump to
overheat and fail.
35. NEVER use lances or other parts that are not
compatible for this specic AR Blue Clean unit.
36. NEVER use an extension power cord since it defeats
the effectiveness of the GFCI and increases the
chance of electrocuting the operator.
37. NEVER spray any electrical outlet with your power
washer.
38. Inspect the power cord before using. DO NOT use it
if it is damaged.
Servicing of a Double-Insulated Appliance
Ground Fault Circuit Interrupter Protection:
This pressure washer is equipped with a ground-fault
circuit-interrupter (GFCI) built into the plugs of the
power-supply cord. This device provides additional
protection from the risk of electric shock. Should
replacement of the plug or cord become necessary,
use only identical replacement parts that include GFCI
protection.
In a double-insulated product, two systems of insulation
are provided instead of grounding. Grounding means
are not provided for a double insulated product, nor
should grounding means be added to the product.
Servicing a double-insulated product requires extreme
care and knowledge of the system, and should only be
done by qualied service personnel.
Replacement parts for a double-insulated product must
be identical to the original parts.
A double-insulated product is marked with the words
“Double Insulation” or “Double Insulated”. Product may
also be marked with symbol shown here
.
Loading ...
Loading ...
Loading ...