AR Blue Clean AR2N1 ASSEMBLY, CARE AND USE INSTRUCTIONS

Loading ...

OPERATING INSTRUCTIONS

Cleaning Garden Hose Adapter

• The screen inside the adapter should be cleaned

periodically. Remove it by dragging a thumb over the

screen with enough pressure to pull the screen and

washer out. Rinse it with clean water and then place

it back in the adapter.

Cleaning Nozzles

• A clogged or partially clogged nozzle can cause

signicant reduction of water pressure coming out

of the nozzle and/or cause the unit to pulsate while

spraying.

• Turn off the unit.

• Turn off the water supply to the unit.

• Relieve any pressure trapped in the hose by

squeezing the trigger 2 - 3 times, then lock the spray

gun by turning the dial to lock (“3” and “9” position).

• Remove the nozzle from the spray gun.

• Using the nozzle cleaner wire provided (or an unfolded

paper clip), insert the wire into the nozzle hole and

move back and forth until debris is dislodged.

• Back ush water through the nozzles using garden

hose and highest pressure available (either standard

water nozzle or use your thumb over the nozzle to

create water pressure for back ush).

Detergents

• Use detergents designed for power washers.

Hardware stores or home centers also have power

washer detergents for different cleaning projects. The

cleaning solution should be the consistency of water

in order to prevent clogging your detergent bottle and

nozzle.

• This system applies detergent under low pressure.

The cleaning power of the detergents is enhanced

when applied with low pressure and enough time is

given to break down dirt and grime. The combination

of low pressure and chemical action is very effective

and can be better than scrubbing if applied properly.

Always spray detergent on a dry

surface. Do not pre-soak area. Wetting the surface

rst dilutes the detergent and reduces its cleaning

ability. Do not allow detergent to dry on surface. On

vertical surfaces being cleaned, apply detergent

to lower surfaces and work your way up to prevent

detergent from causing streaks in the dirt and grime.

Rinse detergent by pressure washing from bottom up

for same reason.

• If a stain is particularly tough, it may be necessary

to reapply the detergent and use a bristled brush to

scrub the stain. Power washing after brushing should

successfully clear the stain.

CARE AND MAINTENANCE

Loading ...

AR Blue Clean AR2N1 2050 Psi, 1.4 Gpm, 13 Amps Electric Pressure Washer

ASSEMBLY, CARE AND USE INSTRUCTIONS - Page 14