Loading ...
Loading ...
Loading ...
3
Using the baby monitor (
Con’t
)
Adjust LCD brightness
You can change the brightness of the parent unit screen from Level 1 to Level 5. The LCD
brightness is preset to Level 3.
1.
Press MENU when the parent unit is idle.
2.
Press or to choose LCD, then press SELECT.
3.
Press SELECT again to choose Brightness.
4.
Press or to choose the desired level of brightness, then press SELECT to confirm your selection.
Turn on and off the dim mode
The dim mode is preset to on to help you save the parent unit power. Your parent unit
display will dim automatically after 10 minutes of inactivity, in which there is neither key
pressed nor alert received from the baby units.
1.
Press MENU when the parent unit is idle.
2.
Press or to choose LCD, then press SELECT.
3.
Press or to choose Dim Mode, then press SELECT.
4.
Press or to choose On or Off, then press SELECT to confirm your selection.
NONO
Note
• While the screen is dimmed, any keypress or alert message will trigger the screen to return to the preset
brightness level. After 10 minutes of inactivity, it will dim again.
Monitoring mode
*
for VM350-2 only
Every time the parent unit is turned on, it displays a baby unit in Single CAM mode. You can
also monitor your baby in Patrol or Split mode.
Single CAM The screen displays image of a single baby unit in full screen.
Patrol A single cam view that transitions to a different baby unit every 10 seconds.
Split The screen displays both baby units.
You can choose the desired monitoring mode.
1.
Press MENU when the parent unit is idle.
2.
Press or to choose Monitoring Mode, then press SELECT.
3.
Press or to choose Single CAM, Patrol or Split, then press SELECT.
In Single CAM or Patrol mode:
• Press VIEW to view the next baby unit.
In Split mode:
• Press or to select a baby unit.
• Press or VIEW to view the selected baby unit temporarily in Single CAM mode. It returns
to Split mode after 10 seconds.
Note
• The parent unit is muted while in Split mode.
Press VIEW
Loading ...
Loading ...
Loading ...