Loading ...
Loading ...
Loading ...
The baby unit has infrared LEDs that allow you to see your baby clearly at night or in a dark
room. When the baby unit being viewed detects low light levels, the infrared LEDs are
switched on automatically. The images from the baby unit are in black and white, and
appears on the screen.
Notes
• It is normal if you see a short white glare on your parent unit screen as the baby unit is adapting to
the dark environment.
• When the infrared LEDs are on, the images are in black and white. This is normal.
Tip
• Depending on the surroundings and other interfering factors, like lightings, objects, colors and
backgrounds, the video quality may vary. Adjust the baby unit’s angle or place the baby unit at a
higher level to prevent glare and blurry display.
Night vision
Your baby monitor comes ready for tabletop use. You can also choose to mount your baby
monitor on the wall. See Mount the baby unit on dry wall (optional) in the Quick Start Guide
for the wall mounting instructions.
Mount the baby unit (optional)
Temperature
too high at CAM #
or
Temperature
too low at CAM #
The temperature detected by the baby unit is higher/lower than
the desired temperature alert range.
Powering on...
The parent unit is turning on.
The parent unit is searching for baby units.
Auto Timer of lullaby is
reset
The timer that determines the remaining play time for the lullabies
is restarted.
The parent unit has just been connected to AC power.
*
# represents the baby unit number.
To keep this product working well and looking good, follow these guidelines:
• Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or
fluorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft cloth.
• DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the baby unit and parent unit are dry before you connect them to the mains again.
General product care
Loading ...
Loading ...
Loading ...