Loading ...
Loading ...
Note
• This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should
not be used as such.
Test your baby monitor
You may test the baby monitor before initial use, and at regular times thereafter.
Caution
• For hearing protection, make sure the parent unit is more
than 3 feet (1 meter) away from both baby units. If you
hear any high-pitched noise, move the parent unit further
until the noise stops. You can also press on the
parent unit to reduce the noise.
1. Make sure your baby units and parent unit are on.
2. The parent unit displays images from the baby unit.
• Speak towards the microphone of the baby unit.
You will hear the sound at the parent unit.
3. Press VIEW on your parent unit. The screen switches to the other baby unit. Then, repeat
step 2.
Note
• When the parent unit displays and then No Link to CAM # (# represents the baby unit
number), and the LINK LED light flashes, move the parent unit closer to the baby units (observe the
minimum distance of 3 feet / 1 meter).
Tip
• Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the
baby units.
Positioning the baby monitor
Caution
• Keep the baby units out of the reach of your baby. Never place or mount the baby units inside the
baby’s crib or playpen.
Note
• To avoid interference from other electronic devices, place your baby monitor away from devices such
as wireless routers, microwaves, cell phones and computers.
1. Place the baby units more than 3 feet (1 meter) away from your baby.
2. Adjust the angle of the baby units camera to aim at your baby.
3. Place the parent unit more than 3 feet (1 meter) away from the baby units.
2
Before use
> 3ft (1m)
3ft (1m)
3ft (1m)
>
<
1
2
3
6
3
>
3ft (1m)
Loading ...
Loading ...
Loading ...