Loading ...
Loading ...
Loading ...
Main menu icons
Monitoring Mode
• You can select a monitoring mode (Single CAM, Patrol or Split).
• For VM350-2 only.
Alert Tone
You can set the parent unit to beep when
• the parent unit operates in low battery condition;
• the link between the parent unit and the baby unit is lost; or
• the baby unit detects sounds while in Split mode.
Language
• You can select a language (English, French or Spanish) to be used in all screen displays.
LCD
• You can change the brightness of the parent unit screen, or turn on the Dim Mode
to save power.
Rename
• You can choose a specific name for the baby unit from a pre-defined name list.
VOX Sensitivity
• With this feature, you can choose to hear sounds from the baby unit all the time, or
to hear sounds that exceed a certain level. You can use the parent unit to adjust the
microphone sensitivity of your baby unit. The higher the sensitivity level, the more
sensitive the baby unit is in detecting sounds for transmitting to the parent unit.
Sound-activated Screen
• When the baby unit detects no sound, the parent unit screen stays off to save
power. Once a sound is detected, the parent unit screen turns on automatically. It
will then turn off again after 50 seconds of no sound detection.
Temperature
• You can choose to set the maximum/ minimum temperature and turn on the
Temperature alert tone, so that the parent unit beeps whenever the room
temperature detected by the baby unit falls outside of the desired temperature range.
• You can choose to display the temperature in Fahrenheit (
o
F) or Celsius (
o
C) on your
parent unit.
Lullaby on CAM
• You can choose a lullaby or soothing sound to comfort your baby.
Volume on CAM
• You can adjust the volume of baby units which determines the lullaby volume and
talkback volume transmitted from parent unit.
Warning icons and messages
No Link to CAM #
*
The selected baby unit is out of range or is turned off.
Battery low at
Parent Unit
The battery level of the parent unit is very low and needs to be
recharged.
Battery empty.
Powering off ...
The battery is empty and needs to be recharged.
Sound detected at
CAM #
The sound level exceeds the threshold at CAM # in Split mode.
Loading ...
Loading ...
Loading ...