Loading ...
Loading ...
Loading ...
OO
Q
4---J
Q
L.L
n
LP
Q
CZ.
oO
LLJ
:>
©
I
©
Z
m
Special Features
There are numerous special features that are controlled using the number key pad.
[] Degree - Fahrenheit or Celsius temperature display
[] End tone- Cycle End Tone
[] Sound- Tone Volume
[] Setting- Clock Setting
[] Auto Recipe -Auto Recipe Conversion
(for Convection Baking)
[] 12hr shutoff- 12 Hour Shutoff
[] Sabbath- Sabbath mode
[] Temp Offset - Adjust the oven temperature
(Double ovens have upper and lower options)
[] Light Bar - Turns the light indicator on or off
[] Default - Reset control to factory settings
To change the Special Features settings follows these
guidelines.
Press and hold the Traditional Bake and Traditional
Broil pads for 3 seconds simultaneously.
When you enter the special features mode:
[] The numbers 2 and 8 act as up and down to scroll
thru the features and their settings.
[] The numbers 4 and 6 act as right and left to change
back and forth from scrolling thru the features to
changing the feature settings.
[] The number 5 acts as an enter pad.
Press and hold the Traditional Bake and Traditional
Broil pads for 3 seconds simultaneously to exit the
special feature mode.
Q
m
Example: Adjusting the Oven Temperature
1. Press and hold the Traditional Bake and Traditional
Broil pads for 3 seconds simultaneously to enter
special features mode.
2. Press the number 2 pad until the display reads "tE-P
oFFSEt" (double wall ovens will have a selection for
both the upper and lower ovens).
3. Press the number 6 pad to change the special feature
setting.
4. Press the number 2 or 8 pads to either increase or
decrease the temperature in one degree Fahrenheit
increments up to + 35 ° F or down to -35 ° F.
5. Press the number 5 pad to save your desired change.
6. Press the number 4 pad to return to the other features.
7. Press and hold the Traditional Bake and Traditional
Broil pads for 3 seconds simultaneously to exit the
special feature mode.
10
Fahrenheit or Celsius Temperature Display
Your oven control is set to use Fahrenheit temperature
units but can be changed to use Celsius temperature
units if preferred.
Cycle End Tone (End tOnE)
This is the tone that signals the end of a timer. You can
change it to be one tone (bEEP) or a continuous repeating
tone (Con bEEP).
Tone Volume (SoUnd)
This feature allows the oven tone volume to be adjusted
between Hi, std (default), Lo and oFF.
Clock Setting (SEttinG)
This feature specifies how the time of day will be
displayed. Options are for a standard 12-hour clock with
AM and PM selections (12 Hr), 24-hour military time
display (24 Hr), or for no display (oFF).
Auto Recipe Conversion (AUto rECiPE)
When using Convection Bake or Convection Bake
Multi cooking modes, Auto Recipe conversion will
automatically reduce the programmed cooking
temperature. Note that this option does not convert
convection baking times, only temperatures.
12-hour Shutoff (12 hr SHUtoFF)
When this feature is turned on, the oven will automatically
turn off after 12 continuous hours of use.
Default (dEFAuLt)
This feature resets all of the special features to the
default settings originally on the oven.
49 80727
Loading ...
Loading ...
Loading ...