Loading ...
Loading ...
Loading ...
Emergency Situations
8-16
OJX1089036LOJX1089036L
12.
Install the spare tire over the centering
pin (1) and then push in the spare tire.
13.
Tighten the wheel bolts with your
fingers onto the studs with the smaller
end of the wheel bolts closest to the
wheel.
14.
Pull out the centering pin (1) and
tighten the last wheel bolt.
15.
Lower the vehicle to the ground
by turning the jack handle
counterclockwise.
OJX1089013OJX1089013
16.
Use the wheel lug wrench to tighten
the wheel bolts in the order shown.
Double-check each wheel bolts until
they are tight. After changing tires,
have an authorized retailer of Genesis
Branded products tighten the wheel
bolts to their proper torque as soon
as possible. The wheel bolt should
be tightened to 101~116 lbf.ft (14~16
kgf.m).
If you have a tire gauge, check the
tire pressure (see “Tires and Wheels”
section in chapter 2 for tire pressure
instructions.). If the pressure is lower or
higher than recommended, drive slowly
to the nearest service station and adjust
it to the recommended pressure. Always
reinstall the valve cap after checking
or adjusting tire pressure. If the cap
is not replaced, air may leak from the
tire. If you lose a valve cap, buy another
and install it as soon as possible. After
changing tires, secure the flat tire and
return the jack and tools to their proper
storage locations.
Loading ...
Loading ...
Loading ...