Loading ...
Loading ...
Loading ...
5.
Place the focus on Accessibility, and press the Select button to open the menu.
6.
The menu will appear with Voice Guide Settings as the selection. Highlight Voice Guide Settings, and then
press the Select button.
7.
A menu appears with the options to change Voice Guide and Volume, Speed, Pitch, Projector Background
Volume.
8.
Select the menu using the directional buttons, and then press the Select button.
The menus are activated when Voice Guide is on.
Running the Accessibility menu functions using Bixby
This function is available only if Voice Assistant is set to Bixby. ( Menu Settings All Settings General &
Privacy Voice Voice Assistant) Try Now
Bixby may not be supported depending on the model or geographical area.
To use Bixby, the Projector must be set up and tuned and must be connected to the network. You can connect the
Projector to the network during the initial setup or do it later through the settings menu.
There are many commands you can say to control the Projector. These can be used together with Voice Guide to
give you voice input and voice output. You can use the Samsung Smart Remote but the Projector must be connected
to the network.
To speak a command, press and hold the button (located near the top right of the Samsung Smart Remote,
directly right the button and say the command, and then release the button. The Projector will the
command.
For example you can:
• Turn Voice Guide on
Press the button on the Samsung Smart Remote, and then say "Voice Guide on".
• Turn High Contrast on
Press the button on the Samsung Smart Remote, and then say "High Contrast on".
- 135 -
Loading ...
Loading ...
Loading ...