Loading ...
Loading ...
Loading ...
06
Installation of image collector
1. Get the image collector ready.
2. Align the locking clip on the side of the image collector with the notch of the telescopic cylinder and
insert it, and then rotate the image collector to align the mark point to fix and jam.
② Insert the image collector① Take off the dust cover③ Rotate clockwise to the
locking position
Install the star finder
1. Prepare the star finder and align the star finder with the support port. Note the gap in the port.
2. Tighten the fixing knob of the star finder.
Tip: Pay attention to the installation direction of the star finder.
① Insert the star finder into the support interface② Tighten the fixing knob of the star finder
Pay attention to the
bayonet position
Loading ...
Loading ...
Loading ...