Loading ...
Loading ...
Loading ...
After receiving the product, users are required to complete the overall assembly of the product by
themselves.
Install the tripod
1. Take out the tripod, loosen the fastening knob of the tripod, and pull out each leg to a uniform length.
2. Flatten the folded structure in the middle of the tripod.
Special Warning
Do not directly observe the sun without properly installed Bader film sunglasses. This will cause the
image collector chip to burn.
Minors should be accompanied by an adult.
Private modification of the telescope is prohibited.
When the telescope is not in use, please cover the dustproof cover to keep the machine clean.
04
03 Installation Instructions
Protect the lens of the objective lens and close the dust cover after use to avoid dust or foreign
objects.
Pay attention to protect the image collector. Please put the protective cover on after use to avoid dust
or foreign matter.
The telescope is suspended from the side, without heavy weight.
When you do not use this product, please lock the various institutions of the gimbal to avoid the
rotation of the astronomical telescope under the action of gravity.
Please use in the environment of -10℃-45℃.
This product is not waterproof, please avoid getting wet by any liquid.
Keep away from fire and heat sources.
Please keep dust out of the lens.
This product is a precision instrument, please avoid collision and violent vibration.
In the case of low temperature, the available capacity of the battery will have different degrees of
decay, this is the characteristics of lithium batteries, is a normal phenomenon.
In case of any abnormal phenomenon, please refer to the troubleshooting manual in time. In case of
any unsolvable fault, please refer to the after-sales instructions.
Disassembling telescopes without permission is not covered by the warranty policy and may result in
irreparable damage.
Loading ...
Loading ...
Loading ...