Loading ...
Loading ...
Loading ...
GPW2600 GAS PRESSURE WASHER
26
10, STROAGE
➢ FUEL STABILIZER
1) Add fuel stabilizer to fuel tank to
minimize the formation of fuel gum
deposits during storage.
2) Run engine at least 5 minutes after
adding stabilizer to allow it to enter the
fuel system.
NOTE: If a fuel stabilizer is not used, all gasoline must be drained from
the tank and carburetor to prevent gum deposits from forming on these parts
and causing possible malfunction of the engine.
➢ DRAINING FUEL
1) Turn fuel valve to the “OFF” position,
remove drain hex screw from the
carburetor.
2) Now turn fuel valve to the “ON” position
and drain the fuel from the tank, carburetor
and hose.
3) Reposition the carburetor drain hex screw
once the fuel is completely drained.
➢ DRAINING OIL
Refer to →PAGE 19 ENGINE MAINTAINENCE.
FUEL STABILIZER
FUEL TANK
Draining
Bolt
Loading ...
Loading ...
Loading ...