Loading ...
Loading ...
Loading ...
GPW2600 GAS PRESSURE WASHER
13
5, ASSEMBLY INSTRUCTIONS
1. Lift the frame with one hand and attach
one of the wheels by pressing the
wheel’s pin and inserting the wheel shaft
into the main frame. Align the pin with the
hole on the frame (A) until it snaps in.
Repeat for the opposite side.
2. Position handle assembly and main
frame and connect them with square
neck bolt, then fasten with the knob.
Repeat this procedure for the opposite
side. When storing the machine, you can
unscrew the knob and fold down the
frame.
3. Slide the upper gun holster all the way
down into the handle assembly.
4. Attach the hose hook to the back of
handle assembly until it slides into place.
5. Assemble the spray gun with the metal
wand. Pull back the rubber piece to
expose the threaded fitting. Then, screw
the two pieces together and move the
rubber piece back.
Loading ...
Loading ...
Loading ...