Loading ...
Loading ...
Loading ...
Step 3: Find a suitable location to place the base station and ensure that it is placed
horizontally;
Step 5: Connect the base station to the power supply as shown in the figure below, press the recharge button to actively search for the robot cleaner for charging.
Notice
1. Avoid using this appliance around infants or pet rooms and keep it away from infants and pets to avoid danger;
2. In order to facilitate the appliance to smoothly return to the base station after cleaning, it is recommended that the cleaning start-point be from the base station. Do not manually move the
clean base station during the cleaning process;
3. The base station has the functions of collecting dust, charging, cleaning and air-drying the mop. A new dust bag has already been installed before leaving the factory;
4. The base station should be placed horizontally on a non-carpet floor that is more than 1.5m away from the carpet;
5. When the map is first started, the appliance starts from the base station to improve the efficiency of map creation.
6
MAX line
Water inlet
Step 4: Take out the clean water tank, remove the lid and fill it with clean water (the water
volume should be below the MAX line). Then put back the clean water tank into the base
station and cover the base station;
*Power cord model: ( China: PC323L+LS-60; United Kingdom: AW301+AW104; Korea: AW103+AW104; United States: DHT13+DHT35; Japan: DHT01+DH104; European Union: AW103+AW104;
Australia: LP-23A+AW104 )
>0.5m
>0.5m
>1.5m
Recharge button
EN
Loading ...
Loading ...
Loading ...