Loading ...
Loading ...
Loading ...
17
Dust Collection Time About 12 seconds
Clean Water Tank About 4L Waste Water Tank About 4L
Product Weight About 9.8kg
Rated Input
24V 1.2A
Rated Output
Dust Bag Capacity About 3L
Noise <86dB（A）
Cleaning Power 40W
Product Size 400 × 382 × 465mm
Product Name Base Station JCZ06RMProduct Model
Basic Specifications
Product Name
Operating Voltage
Battery Capacity 5200mAh
Product Weight
Charging Time
Dust Box Volume
About 250 minutes
About 4.2kg
About 220ml
14.8V
SDJ06RM
Charging limit Voltage 24V 1.2A
Product Model
Noise
Rated Power
Product Size
<77dB（A）
48W
330 × 330× 106mm
Decreased cleaning ability
The dust box is full, please clean the dust box; the filter is blocked, please clean the filter; the roller brush is entangled with
wedged objects, please clean the roller brush
Whether it consumes electricity directly at the base station
When the machine is always in the base station, the battery consumption is low, which helps to keep the battery at its best
performance
There is no water in the cleaning plate but the pump
is still working
Need to clean and wipe the water level contacts
When the robot is performing network configuration,
the base station network configuration status light is
blinking (>3 minutes)
a. Restart the robot and configure the network app; b. Check whether the SN of the robot cleaner and the base station are the
same. If they are inconsistent, you need to manually modify the base station SN to be consistent with the robot cleaner’s SN
through the APP; c.None of the above can solve the problem, please contact the after-sales service for repair.
Timed cleaning does not take effect Timed cleaning will start when the remaining power charge is more than 15%
Can not return return to the base station after partial
cleaning or moving location
Insufficient battery during cleaning, recharge but not
continued
Please make sure that the host is not in the Do Not Disturb mode, it will not continue scanning in this mode; manual recharging
or putting the robot cleaner back to the base station will not continue scanning
Missing sweep of robot cleaner
The wall sensor or the anti-fall sensor is dirty, it is recommended to wipe it with a soft dry cloth
The robot will regenerate the map after area cleaning or long-distance movement. If the base station is far away, it may not
be able to automatically recharge. Please manually put the robot back to the base station to charge
Self-Cleaning and Emptying Robot Vacuum
Battery Type lithium battery
220-240 V~, 50-60 Hz
Charging PowerDust Collection Power 850W 30W
Base Station Network Standby Power Consumption:1.68W; (Robot Vacuum+Base Station) Network Standby Power Consumption:0.90W; Enter network standby time:5min
Freqency Range：2400-2483.5MHz；Maximum Transmiting Power：20dBm(EIRP)
Class I Laser Product：DC5V,240mA,WA 800nm, IEC
During self-cleaning, the APP prompts that the cleaning
tray of the base station is not in place.
Please check that the cleaning tray release buttons on both sides of the cleaning tray snap into place and hear a click
EN
Loading ...
Loading ...