Roidmi EVA 2023 User Manual

Loading ...

Troubleshooting

SolutionTroubleshooting (Robot cleaner)

Error 1: Please check whether the radar is blocked and

move to a new position to start or please check if the

radar is stuck

Error 2: Please check whether the obstacle avoidance

sensor is stuck

Please check whether the obstacle avoidance sensor is jammed by debris, remove the debris, and tap the obstacle

avoidance sensor several times to check whether it is flexible

If the above does not work, please move the appliance to a new location to start

Please don't use it in places with strong light

Please check whether the radar is blocked or jammed by wedged objects, if this is the case please remove the foreign objects

When an abnormality occurs during the operation, the switch key indicator light flashes quickly and a voice prompt is given. The following methods can be used to try to solve the fault by

yourself. If the fault cannot be rectified, please contact the after-sales service.

Please check if the appliance is trapped due to too little running space and move it to a new location to start

Error 3: Please wipe the anti-fall sensor and start away

from the dangerous area

Please check if the appliance is suspended and move it to a new location to start

Please check whether the anti-fall sensor is too dirty or blocked by dust or other debris. You need to wipe the anti-fall sensor regularly

Cleaning the base station parts

Step 1: Clean the waste water tank

Open the top cover of the base station, take out the waste water tank, open the waste water

tank flap to pour out the dirty water and use a long cleaning brush to clean the dirt in the water

tank. After cleaning and drying, put it back into the base station;

Step 2: Replace the filter sponge of the water purification tank

Open the top cover of the base station and take out the clean water tank. Then open the

clean water tank flap and take out the filter sponge holder along the water pipe. Open the

lower cover of the filter sponge holder, take out the filter sponge, replace with a new filter

sponge and reinstall it;

Clean water tank

release flap

Filter sponge holder

Filter sponge

lower cover

Recovery tank release buckle

Step 3: Clean the cleaning tray/base

Program cleaning: Press the cleaning mop button of the base station once to discharge water 4 times, each time the water discharges for 10 seconds, and then press the cleaning mop button

once to automatically withdraw the sewage, and the program cleaning is over;

Manual cleaning: Turn the cleaning disc removal button, take out the cleaning disc, clean the cleaning disc/base with a long cleaning brush and put it back after drying.

Program cleaning Manual cleaning

Cleaning tray removal button

Loading ...

Roidmi EVA 2023 Self-Cleaning and Emptying Robot Vacuum

User Manual - Page 15