Loading ...
Loading ...
Loading ...
Mop disassembly and cleaning
Step 1: Remove the mop
Remove the mopping module from the disk and remove the mop from the mopping bracket;
Step 2: Clean the mops
Rinse the mop with clean water and use it after it dries completely to prevent the dust from
clumping and causing unpleasant odors when used again.
Note
1. Only replace with the original mop designated by the manufacturer, to avoid affecting the cleaning effect of the appliance due to product incompatibility;
2. Be sure to remove the mop for cleaning to prevent dirty water from overflowing;
3. It is recommended to replace the original mop every 3-6 months to ensure a better cleaning effect.
12
Step 1: Cleaning the sensors
Wipe and clean the charging contacts, anti-fall sensors, LDS sensors, and infrared
transmitters on the back of the robot cleaner with a soft clean cloth;
Robot cleaner part cleaning
Step 2: Cleaning the universal wheel
Turn over the appliance and pull out the universal wheel to clean the hair and dirt on the
wheel body and axle. The universal wheel can be washed with water, and then reinstall
after complete drying.
Note
1. When cleaning the anti-fall sensors, infrared sensor and charging contacts, please use a dry cloth to prevent damage caused by water;
2. Be careful when using a screwdriver to replace parts to avoid causing damage to the parts.
EN
Loading ...
Loading ...
Loading ...