Loading ...
Loading ...
Loading ...
first time en
45
¡ For technical reasons steam can
escape from the appliance.
¡ If you press a button, a signal tone
sounds. You can deactivate the
signal tone in the basic settings.
Tip:Check and set the water hard-
ness before using your appliance.
Note
The first beverage will not yet have its
full aroma if:
¡ You are using the appliance for the
first time.
¡ You have run a service pro-
gramme.
¡ You have not used the appliance
for a long time.
Do not drink the beverage.
Tip:You will get a stable, fine-pored
crema after you have started up your
appliance and dispensed a few cups.
6.4 Water filter
1
You can use a water filter to minimise
limescale deposits and reduce impur-
ities in the water.
Inserting or replacing a water filter
If you have to change the inserted
water filter,
lights up on the dis-
play.
ATTENTION!
Possible damage to the appliance
due to limescale build-up.
▶ Change the water filter in good
time.
▶ Change the water filter after
2months at the latest.
▶ Observe the display messages.
Requirement:The appliance is
switched on.
1. Press and hold buttons and
simultaneously for at
least 3 seconds.
2. Press button until the
display shows "W. hardness".
3. Confirm with "ok" button
.
4. Press button until the
display shows "Water filter".
5. Confirm with "ok" button
.
a The display shows "Filter act.".
6. Immerse the water filter in a glass
of water with the opening facing up
and press the sides together lightly
until no more air bubbles rise to
the surface.
→Fig. 7
7. Set the water hardness on the
aroma ring of the water filter.
‒ Press the water filter firmly into
the empty water tank.
→Fig. 8
You can find out the water hard-
ness from your local water sup-
plier.
8. Fill the water tank with water up to
the max mark.
9. Insert water tank into the appli-
ance.
10.Place a container with a capacity
of at least 1.0l under the outlet.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...