Loading ...
Loading ...
Loading ...
4
Operation
4. Control Result
Holding Register (Range 0x0025, Read Function 0x03)
Addresses start at 0 and are numbered 1-16 address as 0-15.
Address
Description Value 0/Value 1Hex Decimal
0x0025 37
Bit15 = Flag: Disable buzzer 0:FAIL / 1:SUCCESS
Bit14 = Flag: Enable buzzer 0:FAIL / 1:SUCCESS
Bit13 = Flag: Test until battery low 0:FAIL / 1:SUCCESS
Bit12 = Flag: Remote turn off UPS 0:FAIL / 1:SUCCESS
Bit11 = Flag: Remote turn on UPS 0:FAIL / 1:SUCCESS
Bit10 = Flag: Cancel shutdown 0:FAIL / 1:SUCCESS
Bit9 = Flag: Cancel test 0:FAIL / 1:SUCCESS
Bit8 = Flag: 10 seconds test 0:FAIL / 1:SUCCESS
Bit7-Bit0 = Reservation N/A
5. Setting Parameter to Default Value
Holding Register (Read Function 0x03, Write Function 0x10)
The Write function writes to ENABLE/DISABLE in a remote device. A specified constant in the data field requests the ENABLE/
DISABLE state.
Address
Description Value 0/Value 1 TypeHex Decimal
0x0030 48
Bit15 = Setting control parameter to default value Y:8000 Read / Write
Bit14-Bit0 = Reservation N/A N/A
0x003B 59
Bit15 = Flag: Setting control parameter to default value 0:FAIL / 1:SUCCESS Read Only
Bit14-Bit0 = Reservation N/A N/A
Loading ...
Loading ...
Loading ...