Loading ...
Loading ...
Loading ...
INSTALLATION / USE & CARE
|
29
PROPER PLACEMENT OF EACH BURNER IS
CRITICAL. AFTER CLEANING THEY MUST BE
CENTERED ON THE BRASS ORIFICE,
RESTING LEVEL WITHOUT ANY ROCKING.
FAILURE TO MEET THESE CONDITIONS MAY
CAUSE A VERY DANGEROUS CONDITION THAT
CAN CAUSE PERSONAL INJURY AND PROPERTY
DAMAGE.
WARNING
GRILLING RACKS
The easiest way to clean the grill racks is to do so imme-
diately after turning o the burners, while they are still hot.
Wearing a long BBQ mitt to protect your hand from steam,
dip a brass bristle brush in hot water and scrub the grill rack.
Dip the brush frequently because the steam helps remove
baked-on foods.
C
LEANIN
G
Y
O
UR
G
RILL
...
co
n
t
in
u
e
d
1. Failure to perform required maintenance will void your
warranty
2. Scrape the bottom of the fi rebox with a plastic utty knife or
similar toll and discard the residue.
3. Clean out the burner orifi ces and ensure they are free of
debris.
4. Clean the drip tray.
WARNING - REQUIRED MAINTENANCE
W
TRIDENT™ BURNER
It’s easy to keep your Trident™ burner operating at peak
performance. Just run it on “HI” with the hood open for 5
minutes after each use to burn away any food particles or
drippings.
Any ash accumulation on the burner screen can be
removed with a light brush or vacuum … BUT WAIT UNTIL
THE BURNER IS COOL!
Every 3 to 6 months, remove the burner and inspect the
venturi (inlet) and orifi ce to ensure that they’re free of
obstructions.
Food debris on the inside of the burner can be gently
shaken out. Do not touch the ceramic surface.
When re-installing the Trident TM burner, be sure to
correctly position the burner.
BEFORE YOU CALL FOR SERVICE
Please check a few things before calling for service:
• Is there fuel supplied to the grill?
• Is the main shut-o valve open?
• Are you using the correct type of fuel? (LP or Natural Gas)
• Is your propane cylinder empty? Have you recently refi lled
the propane cylinder? If so, is the connection tight?
• Have you opened the valve on the propane cylinder?
• Is the grill plugged in to a live electric circuit?
If you’ve checked the above items, review the trouble-shoot-
ing list below before calling for service.
T
R
O
UBLESH
OO
TIN
G
Y
O
UR
G
RILL
Heat Shield
Removed,
Orifi ce/Venturi
Position
Inside View, Orifi ce
all the way into
venturi
Loading ...
Loading ...
Loading ...