Loading ...
Loading ...
Loading ...
24
|
INSTALLATION / USE & CARE
ELECTRIC IGNITION
Before proceeding, make sure you have completed the
“Before Each Use” checklist.
Follow these steps to light any of the burners on your grill:
First, make sure all burner control knobs are set to OFF.
For the Trident™ Burner:
Push and turn the control
knob to the “LITE/MAX”
position, allowing the igniter
to spark and the gas to fl ow.
Leave burners on hgh for 5
minutes before lowering the
temperature.
For the Rotisserie Burner:
Push and turn the control knob to the “LITE/HI”
position, allowing the igniter to spark and the gas to fl ow.
The blue indicator light wil fl ash and remain lit one the burner
ignites.
The grill features a fl ame sensor with a safety valve that
automatically shuts o the fl ow of gas if the burner goes out
for any reason. r.
Extremely cold temperatures may cause your Trident™ burners to light inside the
burners instead of outside. Once lit, if you hear a ‘whooshing’ sound, immediately
turn the burner knobs o to extinguish the fl ame and then immediately re-light
the burners.
COLD WEATHER WARNING:
PROPANE
LI
G
HTIN
G
Y
O
UR
G
RILL
MANUAL LIGHTING
IIf a burner doesn’t light after several attempts, it can be
match lit using the lighting rod stored in the drip tray.
First, make sure you’ve returned all of the control knobs
to the OFF position and have allowed 5 minutes for any
accumulated gas to dissipate before attempting to match
light a burner.
Match lighting is only possible when the grill is connected
to a working outlet or a fresh battery is installed.
Trident™ Burner
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate and through the protective
screen.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob o and wait 5 minutes before attempting to light it
again.
Loading ...
Loading ...
Loading ...