Lynx LF36ATRF 36” PROFESSIONAL FREESTANDING GRILL WITH ALL TRIDENT BURNERS, FLAMETRAK AND ROTISSERIE

All Trident with Flametrak Grills Care & Use Manual - Page 12

For LF36ATRF.

PDF File Manual, 36 pages, Read Online | Download pdf file

LF36ATRF photo
Loading ...
Loading ...
Loading ...
12
|
INSTALLATION / USE & CARE
The grill arrives nearly ready to use and requires only minor
assembly.
By carefully following the uncrating and unpacking steps,
you will improve your fi rst experience with the grill.
Shipping weight on smaller units is app. 300 pounds and
larger units may weigh over 500 pounds.
CRATE & CARTON
IMPORTANT! Do not remove staples around the top of the
carton. These staples hold a wooden pallet in place inside
the carton that protects the unit from damage. Removing
these staples may cause the pallet to fall on the top of grill.
How to Remove the Carton
Cut the main strap holding the grill to the pallet.
Remove the staples at the bottom of the carton.
• Lift o the carton.
With assistance, remove the grill from the pallet and place
into desired location.
The wheels sit down in the gaps of the shipping crate so
that the grill can sit safely and solidly on the crate during
shipping. The grill cannot be slid directly o of the pallet.
One way to safely move
the grill o of the pallet is
by lifting one end of the
grill high enough to place
a ramp under the wheel
and then lift the other end
while rolling the grill o of
the pallet.
When pushing, lifting, or pulling a freestanding grill across
gravel, grass, pavers, brick, stone imprefections in the sur-
face, or wood slatted decks be cautious and move slowly or
use a carpet dolly.
Failure to do so may damage the structure of the cart
wyhich will not be covered under warranty.
INTERIOR PACKING
Lynx uses sturdy tie-down cables and straps to ensure your
grill arrives at your home in the same condition that it left our
factory. BE SURE YOU HAVE REMOVED ALL TIE DOWNS
BEFORE USING YOUR GRILL.
Remove the white accessory box and wood packing, the
grill racks, and remove any loose items from the fi rebox.
Carefully cut the cable ties securing the warming rack and
rotisserie spit.
Trident™ models, cut and remove ties from the burner parti-
tion on the left side of the Trident™ burner.
UNPACKIN
G
& ASSEMBLY
Use two or more people to move or install this unit.
Failure to follow this instruction can result in back
or other personal injuries.
WARNING:
EXCESSIVE WEIGHT HAZARD!
Loading ...
Loading ...
Loading ...