Loading ...
Loading ...
Loading ...
22
NOTE:
1. If you are having trouble connecting your smart equipment, visit www.sunnyfit.com/guide
or scan the QR code below:
E06: Current overload
protection (Self Protecting
System)
The incoming voltage is too low
or too high. The control board is
damaged.
Restart the treadmill. Check the
incoming voltage to ensure it’s
correct. Check the control board,
replace if damaged.
A moving part of the treadmill is
stuck and therefore, the motor is
unable to rotate properly.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly. Check the
motor, listen for strange noise
and check for a burning smell.
Replace the motor if necessary.
E08: Overheat protection
The treadmill is overloaded,
make the current is too high, the
control board is damaged.
Wait the temperature of control
board drop; Check whether the
fan rotates and replace the fan.
Add the lubricating oil; Replace
the control board if necessary.
Loading ...
Loading ...
Loading ...