Loading ...
Loading ...
Loading ...
3. Shooting: Useful Functions
43
To set Interval Rec
Set Interval Rec (page 81) >Setting in
the Project menu to On, and set Number of
Frames and Interval Time.
If using the HVL-LBPC video light (option),
set the time interval for turning on the video
light before recording starts using Interval Rec
>Pre-Lighting in the Project menu, as required.
[Notes]
If you want to turn the video light on before the start
of recording, set the video light switch to AUTO. The
video light turns on and off automatically according
to the setting of Video Light Set (page 100) in the
Technical menu.
If you turn the video light switch on, the video
light is always lit (video light does not turn on/off
automatically).
If the video light is configured so that it will turn off
for a duration of 5 seconds or less, the video light
does not turn off.
The camcorder exits Interval Rec mode when
it is powered off, but the Number of Frames,
Interval Time, and Pre-lighting settings are
maintained. You do not need to set them
again the next time you shoot in Interval Rec
mode.
To shoot using Interval Rec
Press the record button to start recording.
“Int Rec” and “Int Stby” appear alternately
in the viewfinder.
If you are using the pre-lighting function, the
video light turns on before recording starts.
To stop shooting
Stop the recording.
When shooting ends, the video data stored
in memory up to that point is written to the
media.
To exit Interval Rec mode
Do one of the following.
Set the POWER switch to Off.
In recording standby mode, set Interval Rec
>Setting in the Project menu to Off.
Also, Interval Rec mode is automatically
released when the camcorder is restarted.
Limitations during recording
Audio is not recorded.
Reviewing the recording (Rec Review) is not
possible.
Genlock is not applied.
If the camcorder is turned off during
recording
If the POWER switch on the camcorder is set
to the Off position, the media is accessed for
several seconds to record the images stored
in memory up till that moment, and then
the power turns off automatically.
If power is lost because the battery
was removed, the DC power cord was
disconnected, or the power was turned off
from the AC adaptor, then the video and
audio data shot up to that point may be
lost (maximum 10 seconds). Care should be
exercised when exchanging the battery.
Recording Cached Pictures (Picture
Cache Rec)
The Picture Cache Rec function allows you
to capture video retroactively when you
start recording and then record it to XQD
memory cards by maintaining an internal
cache memory of a specified duration when
shooting. The picture cache recording time is
set using Picture Cache Rec >Cache Rec Time
(page 82) in the Project menu.
Supported recording formats
Codec Video
format
System
frequency
Cache
time
[sec.]
XAVC-I 3840×2160P 59.94 0–4 sec
50
29.97
25 0–4/
4–8 sec
23.98
1920×1080P 59.94 0–4/
4–8 sec
50
29.97 0–4/
4–8/
8–12/
12–16/
16–20/
20–24 sec
25
23.98 0–4/
4–8/
8–12/
12–16/
16–20/
20–24/
24–28 sec
Codec Video
format
System
frequency
Cache
time
[sec.]
XAVC-I 1920×1080i 59.94 0–4/
4–8/
8–12/
12–16/
16–20 sec
1920×1080i 50 0–4/
4–8/
8–12/
12–16/
16–20/
20–24 sec
XAVC-L 3840×2160P 59.94 0–4/
4–8/
8–12/
12–16 sec
50
29.97 0–4/
4–8/
8–12/
12–16/
16–20/
20–24/
24–28 sec
25
23.98
1920×1080P
50
59.94 0–4/
4–8/
8–12/
12–16/
16–20/
20–24/
24–28 sec
50
29.97
25
23.98
1920×1080P
35
59.94 0–4/
4–8/
8–12/
12–16/
16–20/
20–24/
24–28 sec
50
29.97
25
23.98
Loading ...
Loading ...
Loading ...