Loading ...
Loading ...
Loading ...
12
3.
Move the device slowly and continuously from the
bottom to the top of the treatment area to avoid
missing areas. Make sure to always keep full skin
contact so that the device flashes continuously.
3. Lift off the device and place it onto the next
adjacent spot to be treated. Wait for the
power bars to show white LEDs. Then press and
release the treatment button.
Once you have completed your first gliding stroke, lift
the device off the treatment area. Repeat steps 1 to
3 to treat the next adjacent area in a parallel stroke.
Continue treatment spot by spot until you have
completed the entire area you wish to treat.
Make sure to avoid missed areas by placing the treatment window directly next to the previously
treated spot without leaving any space between treated areas.
If you feel intense pain, stop treatment immediately and consult your physician before using the device again.
Treatment head(s)
The standard head (10) can be used on all areas.
The wide head (11)* is for large body areas.
The precision head (12)* has been specifically designed for small, curvy, hard to
reach areas.
In case your device comes with two precision heads, one of them is marked +.
This helps distinguishing the head used on the face from the head used on other
body areas
+
.
Step 4: Your Treatment Schedule
For optimal results, the device should be used once a week for 12 weeks to ensure all hair follicles are
treated. After the initial treatment phase (12 treatments), we recommend the device is used once a month,
or as required, to maintain results.
Step 5: Switching Off the Device
When the treatment is finished, unplug the device. Refer to section 9 for details of how best to look after
your device.
9 Cleaning, Maintenance and Storage
After treatment, always unplug the device.
After use, the handset, the skin tone sensors (2) and the treatment window (1) should be inspected for
damage and wiped down with a dry, lint free cloth. If any marks or black spots are seen, then it is best to
clean them off straight away after treatment.
NEVER use water or other cleaning fluids, as these can damage the device leading to a potential safety hazard.
WARNING: The glass filter (9) can get hot during use. DO NOT touch or clean the filter for at least 5 minutes
after use to allow it to cool down.
To ensure maximum performance, keep the heads (10, 11, 12) with their built-in reflectors free from dirt,
hair or other debris. Do not clean them in water, but use a dry cloth for cleaning them carefully.
Store the device in a cool, dry place. Make sure that the treatment window and skin tone sensors are
protected from damage.
Regularly check the device (including cords) for visible signs of damage. In case of damage or cracks,
stop using the device.
Travelling with the Device
The device will work with all commonly encountered mains supplies. Providing you have a suitable adaptor
for the mains power cable plug, the device will operate as normal.
90059365_ECLIPSE_PL5_NA.indd 1290059365_ECLIPSE_PL5_NA.indd 12 25.05.21 16:1625.05.21 16:16
Loading ...
Loading ...
Loading ...