Loading ...
Loading ...
Loading ...
11
no lights
no skin contact U device cannot be activated
red light
invalid skin tone U device cannot be activated
Thanks to the built-in, intelligent SensoAdapt
TM
, which automatically measures the skin color, there is no
need for the user to make any manual adjustment for skin tone. The skin tone chart on page 3 is displayed
also on the sales box as a guidance to potential purchasers to determine if the device will work on their
skin colouration. This does not relate to the Fitzpatrick scale, it is simply a color guide.
Number of Power bar
lights illuminated
10987654321
Max. energy (J/cm²) 6.00 5.78 5.56 5.33 5.11 4.89 4.67 4.44 4.22 4.00
c) Press the treatment button (5). The device will flash and a warm sensation should be felt.
If you find the treatment uncomfortable, you can reduce the light intensity using the sensitive mode
button (4) by toggling through the following 3 settings:
Standard: 3 indicator lights
Sensitive: 2 indicator lights
Extra sensitive: 1 indicator light (lowest light intensity with fast flash rate)
Sensitive and extra sensitive settings are meant for sensitive areas and first time users. With reduced
light intensity more treatments may be required to see the desired effects.
The power bars flash to confirm a change in the light intensity setting.
When holding the sensitive mode button (4) longer than 3 seconds, the device is deactivated.
After 10 minutes without use, the device is automatically deactivated. To re-activate, press
any button.
d) Move the treatment window to the next area to be treated and repeat. The device needs to recharge
between flashes. This will take less than a second.
e) Ensure that the entire area receives treatment, but DO NOT treat an area twice (overlapping flashes).
If the device is used in high ambient temperatures for extended treatment sessions, short pauses in
treatment may be seen to allow cooling. This is normal and operation will resume once the device is
cooled.
8 Treatment Modes
The area to be treated has to be hair-free, clean and dry. Before pressing the treatment button, look away
from the device to avoid the bright light. In seldom cases, a user may find the flash too bright, however
there is no safety risk associated with this. For increased comfort, we recommend treating in a well-lit
room to help reduce the perceived brightness.
GLIDING
for fast and efficient
treatment of large areas
(e.g. legs).
STAMPING
for treating small,
hard-to reach areas
(e.g. face for females,
bikini line, underarms,
knee, chin, ankles)
1. Place the treatment window (1) firmly on your skin, ensuring both skin sensors (2) have skin contact.
Power bars (3) show white LEDs.
2. Press and hold the treatment button (5).
The device will begin to flash.
2. Press and instantly release the treatment
button (5). The device will emit a flash.
90059365_ECLIPSE_PL5_NA.indd 1190059365_ECLIPSE_PL5_NA.indd 11 25.05.21 16:1625.05.21 16:16
Loading ...
Loading ...
Loading ...