Diono 50020 Radian 3RXT, 4-in-1 Convertible Car Seat, Rear and Forward Facing

Instruction Manual - Page 30

For 50020.

PDF File Manual, 36 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
1-855-463-4666
30
REAR-FACING INSTALLATIONS:
5-45 lbs (2.3-20 kg)
Infants who weigh less than 20 lbs (9 kg) and are
under 1 year old, MUST use this car seat
Rear-Facing.
Place car seat rear-facing in the vehicle back seat.
Make sure LATCH strap or vehicle seat belt is
routed through the rear-facing belt path marked
with the blue label and rear-facing illustrations.
Install this car seat tightly in your vehicle. The car
seat should not move at the rear-facing belt path
location by more than 1 in. (2.5 cm) from side to side,
front to back. If using a lap belt only, refer to your
vehicles owners manual for installation advice.
Harness straps MUST be at or just below the top
of your child’s shoulders. The chest clip should be
placed at armpit level.
The American Academy of Pediatrics (AAP) and
NHTSA recommend that children be rear-facing
until the age of 2 or until they reach the maximum
rear-facing height and weight. This car seat can
remain rear-facing up to 45 lbs.
Rear facing top tether is available.
REAR FACING
us.diono.com/welcome
43
4. Place LATCH in Forward-facing
belt path.
Unzip the pocket to the right side
of the latch storage area, this will
allow you to move the latch
connectors down to the forward
facing belt path. Feed LATCH
anchors as shown; once
completed – close the zip pocket.
5. Place Car Seat Forward-Facing
in Back Seat of the Vehicle
Place forward-facing in vehicle
seat and center the car seat
between the lower LATCH
anchors. The base should sit fl at on
the vehicle seat.
6. Loosely Attach Top Tether Strap
Do not tighten. Consult vehicle’s
owner manual for specifi c location.
FORWARD FACING
18_Diono_RXT_3_Instructions-MASTER.indd Spread 30 of 36 - Pages(30, 43)18_Diono_RXT_3_Instructions-MASTER.indd Spread 30 of 36 - Pages(30, 43) 21/05/2018 17:0621/05/2018 17:06
Loading ...
Loading ...
Loading ...