Loading ...
Loading ...
Loading ...
1-855-463-4666
24
TOP TETHER
WHAT IS TOP TETHER?
A tether is designed to reduce movement of a rear-
facing and forward-facing child restraint in a crash and
aids in the achievement of a tight installation.
Vehicle tether locations can be found in many
locations within the vehicle. Some of the typical
locations are shown here. Please refer to your vehicle
owner’s manual for exact locations, requirements, and
anchor identifi cation points.
WARNING: Rear-facing Top Tether connector strap is
ONLY to be used in rear-facing installations.
1. Locate the track of vehicle seat that is bolted directly
to vehicle frame.
2. Wrap tether connecting strap around the track, and
thread metal ‘D” ring through the loop at the end of the
tether connecting strap. Pull strap to form a knot.
3. Now, use metal ‘D’ ring as an anchorage point for
top tether metal hook.
us.diono.com/welcome
49
FORWARD FACING
7. Test For Tightness.
Grab the side of the seat on the
buckle side with one hand where
the LATCH strap is and slide the
car seat side-to-side and front-to-
back. If the seat moves less than 1
inch (2.5 cm), it is tight enough. Do
not test by grasping top of the seat.
18_Diono_RXT_3_Instructions-MASTER.indd Spread 24 of 36 - Pages(24, 49)18_Diono_RXT_3_Instructions-MASTER.indd Spread 24 of 36 - Pages(24, 49) 21/05/2018 17:0621/05/2018 17:06
Loading ...
Loading ...
Loading ...