Loading ...
Loading ...
Loading ...
1-855-463-4666
62
HARNESS STRAP REMOVE/REPLACE
1. Unzip Back Seat Cover to access harness. Remove
harness straps from the metal hook.
2. Pull the harness straps out from the back of the seat
and remove the Chest Clip and Harness Pads from
each side. Slide the harness strap out of the buckle
tongues.
3. Using a Phillips head screwdriver, take out the
screws and remove the access panel shown. Remove
old harness straps from seat.
4. Insert new harness strap through the slot shown
and pull the strap up.
5. Once the strap is pulled up until the metal D-ring
is located as shown, re-fasten and close the access
panels in step 3.
Slide the new harness straps through the buckle
tongues, re-attach the chest clip and reinstall the
harness pads.
Slide the harness straps through to the back of the seat
and re-install them to the metal hook in Step 1.
us.diono.com/welcome
11
ALWAYS install this Child Restraint in the back seat.
The back seat is the safest place for children 12 and
under. See your vehicle owner’s manual for Child
Restraint installations and instructions.
According to accident statistics, children are
safer when properly restrained in the rear seating
positions than in the front seating positions.
Child restraint systems should be securely belted
to the vehicle, even when they are not occupied.
In a crash an unsecured child restraint system may
injure other occupants.
18_Diono_RXT_3_Instructions-MASTER.indd Spread 11 of 36 - Pages(62, 11)18_Diono_RXT_3_Instructions-MASTER.indd Spread 11 of 36 - Pages(62, 11) 21/05/2018 17:0621/05/2018 17:06
Loading ...
Loading ...
Loading ...