Loading ...
Loading ...
Loading ...
1-855-463-4666
18
VEHICLE SEATING LOCATIONS
The safest seating position is one that works best for
your specifi c car seat, family and vehicle model.
When determining whether the Diono RXT Car Seat
can be used with lower anchors in the rear center
seating position, it is critical that you refer to your
vehicle owner’s instruction book. If the RXT does not
install best in the rear center seating location, it is
recommended to move to one of the outboard seating
positions.
Before installing this child restraint you must determine
the method of installation and the best vehicle seating
position for that method. This child restraint can be
installed either using LATCH or the Vehicle Seat Belt.
DO NOT install using both methods at the same time.
us.diono.com/welcome
55
HARNESS ADJUSTMENT
5. Rotate Metal Retainer and Insert It Up Through the
Shell and Pad
From the top of the car seat, pull the buckle strap out.
6. Insert Metal Retainer in the New Buckle Slot
Position
Reach underneath the car seat and pull the metal
retainer through.
7. Pull Up on Center Buckle Strap to Make Sure it is
Secured
8. Pull All the Slack Out From Around the Waist
Pull up on the harness strap while pushing the chest
clip down. Do this to both sides.
9. Tighten the Harness by Pulling the Harness
Adjustment Strap
When you are not able to pinch any of the harness
webbing at your child’s shoulder, the harness is tight
enough. A snug harness should not allow any slack. It
lies in a relatively straight line without sagging. It does
not press on the child’s fl esh or push the child’s body
into an unnatural position.
10. Buckle the Chest Clip
You will hear a “click” when the chest clip is securely
buckled.
11. Raise the Chest Clip to the Child’s Armpit Level.
18_Diono_RXT_3_Instructions-MASTER.indd Spread 18 of 36 - Pages(18, 55)18_Diono_RXT_3_Instructions-MASTER.indd Spread 18 of 36 - Pages(18, 55) 21/05/2018 17:0621/05/2018 17:06
Loading ...
Loading ...
Loading ...