Loading ...
Loading ...
Loading ...
en Meat thermometer
14
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the oven cavity too
long.
Requirements
¡ The type of heating and temperature or setting are
set.
¡ A cooking time is set.
¡ Operation with the meat probe has not been set.
¡ Operation with Sabbath mode has not been set.
1.
Press the
button repeatedly until the symbol for
the oven being switched on and the symbol are
highlighted.
2.
Press the or button.
a The display shows the calculated end time.
3.
Use the
or button to delay the end time.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
4.
When the cooking time has elapsed:
‒ Press any button to end the signal prematurely.
‒ To set another cooking time, press the
button.
‒ When your food is ready, switch off the appli-
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
is highlighted on the display.
▶
Use the
or button to delay the end time.
a The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end at any time.
Requirement:
is highlighted on the display.
▶
Reset the end time to the current time plus the set
cooking time using the
button.
a After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:The function selector must be set to the
"Off" position
.
1.
Use the
or button to set the time.
2.
Press the button.
a The time that is set appears on the display.
Tip:You can go to the basic settings →Page17 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement:The function selector must be set to the
"Off" position
.
1.
Press the
button repeatedly until is highlighted
in the display.
2.
Use the or button to change the time.
a The appliance applies the change after a few
seconds.
9 Meat thermometer
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. Once the set core temperature has been
reached in the food, the appliance stops automatically.
The meat probe can be used in the main oven
.
The time-setting options for cooking time and end time,
as well as the cleaning function, cannot be used with
the meat probe and the Sabbath setting at the same
time. Example: The cooking time in the top oven can-
not be operated at the same time as the meat probe in
the main oven.
9.1 Suitable types of heating with the meat
thermometer
Only certain types of heating are suitable for use with
the meat thermometer.
Suitable heating functions include:
¡ CircoTherm hot air
¡ CircoTherm gentle
¡ Pizza setting
¡ Circo-roasting
¡ Top/bottom heating
Note:If the meat thermometer is being used and you
select an unsuitable type of heating, a signal sounds.
9.2 Inserting the meat thermometer
Use the meat thermometer supplied or order a suitable
meat thermometer from our after-sales service.
WARNING‒Risk of electric shock!
Using the wrong meat probe could damage the insula-
tion.
▶ Only use the meat probe for this specific appliance.
Loading ...
Loading ...
Loading ...