Loading ...
Loading ...
Loading ...
CLEANING YOUR NINJA® FOODI® SMART XL GRILL
The unit should be cleaned thoroughly after
every use. Always let the appliance cool before
cleaning.
Unplug the unit from the wall outlet before
cleaning. Keep the hood open after removing
your food to allow the unit to cool quicker.
The cooking pot, grill grate, crisper basket,
splatter shield, cleaning brush, and any other
included accessories are dishwasher safe,
except the thermometer. DO NOT place the
thermometer in the dishwasher.
For the best dishwasher cleaning results,
we recommend rinsing the grill grate,
crisper basket, splatter shield, and any other
accessories with warm water before placing
them in the dishwasher.
If hand-washing, we recommend using the
included cleaning brush to help wash the
parts. Use the opposite end of the cleaning
brush as a scraper to assist with releasing
baked-on sauces or cheese. Air-dry or towel-
dry all parts after hand-washing.
If food residue or grease are stuck on the grill
grate, splatter shield, or any other removable
part, soak in warm soapy water before
cleaning.
Clean the splatter shield after every use.
Soaking the splatter shield overnight will help
soften the baked-on grease. After soaking, use
the cleaning brush to remove the grease from
the stainless steel frame and front tabs.
Deep clean the splatter shield by putting it in
a pot of water and boiling it for 10 minutes.
Then, rinse with room temperature water and
allow to dry completely.
The Foodi Smart Thermometer and holder are
hand-wash only. DO NOT immerse any part of
the thermometer in water or any other liquid. We
recommend cleaning with a damp cloth only.
Dehydrate (Not available on all models)
1 Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Place a single layer of ingredients in the
pot. Then place the crisper basket in the pot
on top of the ingredients and add another
layer of ingredients to the basket. Ensure the
splatter shield is in place, then close
the hood.
2 Press the DEHYDRATE button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up
to 195°F.
3 Use the set of arrows to the right of the display
to adjust the dehydration time, in 15-minute
increments, up to 12 hours.
4 Press START/STOP to begin. (The unit does
not preheat in Dehydrate mode.)
5 When dehydration time is complete, the unit
will beep and END will appear on the display.
Broil (Not available on all models)
1 Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Place ingredients in the pot. Ensure the
splatter shield is in place, then close the hood.
2 Press the BROIL button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up to 500°F.
3 Use the set of arrows to the right of the
display to adjust the cook time, in 1-minute
increments up to 30 minutes, or, if using the
thermometer, refer to the Using the Foodi™
Smart Thermometer section.
4 Press START/STOP to begin. (The unit does
not preheat in Broil mode.)
5 When cook time is complete, the unit will beep
and END will appear on the display.
NOTE: NEVER use abrasive tools or cleaners.
NEVER immerse the main unit in water or any
other liquid.
12
ninjakitchen.com
NOTE: DO NOT use liquid cleaning solution
on or near the thermometer jack. We
recommend using compressed air or a cotton
swab to avoid damaging the jack.
USING THE NINJA® FOODI® SMART XL GRILL – CONT.
NOTE: To check your food’s internal
doneness, press MANUAL for 2 seconds and
the food’s internal temperature will appear
on the screen. Press and hold button again
to exit mode.
13
ninjakitchen.com
Loading ...
Loading ...
Loading ...