Loading ...
Loading ...
Loading ...
– 25 –
MAINTENANCE
The tilting braising pan and its parts are hot. Use care when operating, cleaning
or servicing the braising pan.
Disconnect the electrical power to the machine and follow lockout / tagout procedures
before performing any maintenance.
LUBRICATION
Lid Mechanism
1. The lid lift mechanism and tension spring are located behind the backsplash (sheet metal panel
behind the braising pan) on both the left and right rear corners of the braising pan.
3. For smooth operation of the lid, lubricate these mechanisms with 8 to 10 drops of lubricating machine
oil every 6 months. Place a few drops of oil between the lid arm and stationary block, and a few
drops on the shaft around which the spring is coiled.
4. Replace the cover to maintain smooth operation.
Fig. 9
ADJUSTMENTS
At least twice a year, have a Vulcan authorized service person clean and adjust the tilting braising pan
for maximum performance.
FLUE
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning the tilting braising pan, contact the Vulcan service
agency in your area (refer to listing supplied with the braising pan) or Vulcan service department at the
address or phone number shown on the front cover of this manual.
PL-41754-1
LUBRICATE
COVER
Loading ...
Loading ...
Loading ...