Loading ...
Loading ...
Loading ...
OVEN BOTTOM
Protect the oven bottom against excessive spillovers,
especially acid or sugary spillovers, as they may discolor the
porcelain. Use the correct size cooking utensil to avoid
boilovers. Never place utensils or aluminum foil directly on
the oven bo_torn.
To remove: When cool, remove the oven racks. Slide the
two catches, located at each rear corner of the oven bottom,
toward the front of the oven. Lift the rear edge of the oven
bottom slightly. Then s!ide it back until the front edge of the
oven bottorn clears the oven fm,nt frame. Remove the oven
bosom from the oven.
To replace: F_tthe fr',._n!edge of the oven bottom into the
front fr2me. Lower the rear of the o-'en bottom and slide the
two catches back to lock the oven bottom ir_toplace.
OVEN LIGHT, if equipped
Before replacing the light bulb, DISCONNECT POWER TO
THE RANGE. Be sure the bulb is cool. Do not touch a hot
bulb with a damp cloth as the bulb may break.
To turn on oven light: Push in the rocker switch located on
the backguard.
To replace oven light: Be sure the bulb is cool. Use a dry
potholder, to prevent possible harm to hands, and very
carefully unscrew bulb.
LOWER PANEL, if equipped
Ranges that are not equipped with a lower broiling
compartment will have a panel in place of the broiler door.
This panel must be removed to access the rating plate
located on the lower range front frame. The rating plate
contains the model and serial numbers for your appliance.
To remove panel: Grasp the bottom corners of the panel.
Then lift the panel up and away from the range.
To replace panel: Align the four slots on the panel with the
four screws on the range front frame. Then lower the panel
and push down until the panel snaps into place.
ELECTRICAL CONNECTION
Appliances which require electrical power are equipped
with a three-prong grourtding plug which must be
plugged directly into a properly grounded threc_-hoie 120
voi[ electrical outlet.
i
Always disconnect power to appliance before servicing.
!
1
I
i
t
!
!
i
!
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
..... i
Replace with a 40 watt appliance bulb and reconnect power
to the range. Reset the clock.
Loading ...
Loading ...
Loading ...