Loading ...
Loading ...
Loading ...
1 Gently place your URSA Broadcast G2 upside down on a flat, stable surface so you can
easily access the base of your camera.
2 Fasten the shoulder kit baseplate to URSA Broadcast G2 using the 2 x 1/4" flat head
screws and driver.
3 Tighten the screws until the baseplate is firmly attached and the screws won’t loosen.
Avoid over-tightening as it may damage the screw threads.
To attach the top handle with URSA Viewfinder adapter plate
The top handle is supplied with URSA Viewfinder adapter plate already fitted. For information
on installing the optional Blackmagic URSA Viewfinder, refer to the next section of this manual.
1
Top handle URSA Viewfinder cap
2
Place your URSA Broadcast G2 on a flat, stable
surface so you can access the top of your camera.
Fasten the handle to any two of your
URSABroadcast G2’s top 1/4" mounting points
using the two supplied 1/4" screws with a 3/16" Hex
key driver. URSA Broadcast G2’s rear two mounting
points are recommended for most situations, but
you can choose any pair for better weight balance
when using large lenses.
3
Tighten the screws until the handle is firmly in
place and the screws won’t easily loosen. Avoid
over-tightening the screws as it may damage the
screw threads.
The URSA Mini Shoulder Kit extension arm and LANC cable are available as optional accessories.
132URSA Mini Shoulder Kit
Loading ...
Loading ...
Loading ...