Loading ...
Loading ...
Loading ...
36 TROUBLESHOOTING
Noises
LE
MOTOR LOCKED
ERROR
A motor error has occurred.
• Allow the washer to stand for 30 minutes and then restart the cycle.
• If the error code is still displayed, call for service.
PF
POWER FAILURE
Power failure or inadequate electrical service may have occurred during operation.
• Press the Start/Pause button to restart the cycle.
FF
FROZEN ERROR
Inlet hose, drain hose or drain pump is frozen.
•See Care in Cold Climates in the front-loading washer manual.
CL
CONTROL LOCK
FUNCTION
The Control Lock function is on to prevent anyone from changing cycles or operating
the washer.
• Turn off the Control Lock function in the control panel. See Control Lock under Options.
tcL
TUB CLEAN ALARM
It is time to run the Tub Clean cycle.
• This is not an error code. It indicates that the Tub Clean cycle is running or needs to be run
to clean the washer drum.
E7
STACKING ERROR
Pedestal washer is being operated without a full-size washer.
• The pedestal washer will not operate as a standalone unit. It must be stacked under a full-
size LG appliance.
Stacking switch is not working properly.
• The stacking switch will not operate properly if the unit is stacked under a non-LG
appliance, or an LG appliance manufactured before 2009.
Ps
VOLTAGE
ABNORMALITY
ERROR
Abnormal voltage detected.
• Unplug the power plug for a few minutes and plug it back in. If the error recurs, call for
service.
Problem Possible Cause & Solution
Clicking Lid lock sounds when the lid locks or unlocks.
• Normal operation
Spraying or hissing Water spraying or circulating during the cycle
• Normal operation
Humming or
Gurgling
Drain pump is pumping water from the washer at times during a cycle.
• Normal operation
Water sloshing A liquid in the balance ring around the pulsator helps the basket spin smoothly.
• Normal operation
Water being added
after the washer has
already begun to
operate
The washer adapts to the load size and type to add more water to the cycle as needed.
• Normal operation
The wash load may be unbalanced. If the washer senses that the load is unbalanced, it
will stop and refill to redistribute the load.
• Normal operation
The washer may be diluting laundry additives to add to the wash load.
• Normal operation
Problem Possible Cause & Solution
Loading ...
Loading ...
Loading ...