XOGSIDEBURN GCARTSBXLT

XOGSIDEBXLT User Manual - Page 19

For XOGSIDEBURN.

PDF File Manual, 36 pages, Read Online | Download pdf file

XOGSIDEBURN photo
Loading ...
Loading ...
Loading ...
19
before hooking up your gas connections
WARNING
Your XO gas appliance is designed for use with either Natural Gas or Propane (LP).
HOWEVER, it must be set up correctly to use one or the other fuel. Different fuels cannot be used
interchangeably.
Operation with using natural gas requires different burner orifices and a different regulator set up than for
propane and vice versa.
If your unit has been set up for to use one type of fuel and you wish to power it with the other fuel - the
appliance must be converted for that use. A gas conversion should only be performed by an experienced
gas appliance technician.
Every gas installation must include a readily accessible emergency shut off valve close to the unit. The
valve should be at the gas supply source outdoors after the gas line exits the outer wall of the house and
before it connects to the flex line or QD line. If the gas line is to be buried, it should connected before it
enters the ground. It is highly recommended that the valve have the ability to lock when closed to prevent
accidental opening. Any locking or sercurity device cannot interfere with the ability to rapidly close the
valve in an emergency. Some locations require this locking feature by code.
XO gas units are shipped as customer spcified set up for use with Natural Gas or Propane. This is
designated by the last letter of the model number. Confirm the correct fuel type before installation.
If the model number ends with “L” the unit has been set up to burn Propane.
If the model number ends with “N” the unit has been set up to burn Natural Gas.
In either case, the unit is shipped with the appropriate regulator. Natural Gas regulators operate with an
outlet pressure of 4 “ W.C. and Propane regulators operate at 11” W.C.
All threaded fittings must be properly sealed with pipe compound or tape with has been approved for use
on gas systems.
During gas system pressure testing, (equal to or exceeding 1/2 PSI - 3.5 KPa), the gas appliance must be
disconnected from the supply using the isolation shut-off valve.
Loading ...
Loading ...
Loading ...