Loading ...
Loading ...
Loading ...
12
OPERATING INSTRUCTIONS
NOTE: Fan speeds, SLEEP mode, and FOLLOW ME feature can
onlybeadjustedwiththeremotecontrol.
NOTE: When selecting a mode on the unit’s display, fan speed
cannot be selected. The fan speed goes to “auto” by default.
COOL mode
• Press the “MODE” button until the “COOL” indicator light
comes on.
• Pressthe“+”or“-”buttontoselectyourdesiredroom
temperature. The temperature can be set within a range of
62°F~86°F/17°C~30°C.
• Press the “FAN SPEED” button on the remote control to
choose the fan speed.
FAN mode
• Press the “MODE” button until the”FAN “ indicator light
illuminates.
• Press the “FAN SPEED” button on the remote control to
choosethefanspeed.Thetemperaturecannotbeadjusted.
• Remove exhaust hose and slider.
DRY mode
• Press the “MODE” button until the “DRY” indicator light
comes on.
• Underthismode,youcannotselectafanspeedoradjustthe
temperature. The fan motor operates at LOW speed only.
• Keep windows and doors closed for the best dehumidifying
effect.
• Remove exhaust hose and slider when in this mode.
SLEEP/ECO mode
NOTE: This feature can be activated from the remote control
ONLY.
To activate SLEEP feature, the set temperature will increase by
2°F(1°C)in30minutes.Thesettemperaturewillthenincrease
byanother2°F(1°C)afteranadditional30minutes.Thisnew
temperaturewillbemaintainedfor7hoursbeforeitreturnsto
the originally selected temperature. This ends the SLEEP mode
and the unit will continue to operate as originally programmed.
NOTE: This feature is unavailable under FAN or
DRY mode.
FOLLOW ME feature
NOTE: This feature can be activated from the remote control
ONLY.
The remote control serves as a remote thermostat allowing for
the precise temperature control at its location. To activate the
FOLLOW ME feature, point the remote control toward the unit
and press the FOLLOW ME button. The remote displays the
actual temperature at its location. The remote control will send
thissignaltotheairconditionerin3minuteintervalsuntilthe
FOLLOW ME button is pressed again. If the unit does not receive
theFOLLOWMEsignalduringany7minutespan,theunitwill
beep to indicate the FOLLOW ME mode has ended.
Auto-Restart
If the unit breaks off unexpectedly due to the power being cut, it
will automatically restart with the previous function setting when
the power resumes.
*WAIT 3 MINUTES BEFORE RESUMING
OPERATION. Operation will automatically start
after 3 minutes (once the unit is powered on). This
is to protect the unit.
Air Flow Direction Adjustment
• Adjusttheairowdirectionmanuallybyusingthetabto
move the louvers up or down.
• Donotplaceanyheavyobjectsorotherloadsonthelouver;
doing so will cause damage to the unit.
• Keep the louver fully opened during all operations.
Loading ...
Loading ...
Loading ...