Snow Joe 24V-X4-SB21 96-Volt* MAX IONMAX Cordless Brushless Single-Stage Snow Blower | 21-inch

OPERATOR’S MANUAL - Page 8

For 24V-X4-SB21.

PDF File Manual, 60 pages, Read Online | Download pdf file

24V-X4-SB21 photo
Loading ...
Loading ...
Loading ...
8
4. When the charger lights turn green, the batteries are fully
charged (Fig. 9).
NOTE: A fully discharged pack with an internal temperature
in the normal range will fully charge in 6 hours (between
32
º
F/0
º
C and 113
º
F/45
º
C).
5. If the light indicators do not come on at all, check that
the battery packs are fully seated into the bay. Remove
the battery packs and reinsert. If the problem persists,
contact an authorized Snow Joe
®
+ Sun Joe
®
dealer or
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1‑866‑SNOWJOE (1‑866‑766‑9563) for assistance.
6. When charging is complete, remove the batteries from the
charger by pressing the push lock buttons and sliding the
batteries backward to unlock them from the charger
(Fig. 10).
mCAUTION! FIRE HAZARD. When removing the batteries
from the charger, be sure to unplug the charger from the outlet
first, then remove the batteries from the charger.
mWARNING! This charger does not automatically turn
off when the batteries are fully charged. Please take care not
to leave the batteries in the charger. Switch off or unplug the
charger at the mains when charging is complete.
7. Timely recharging of the batteries will help prolong the
batteries’ life. You must recharge the battery packs when
you notice a drop in the equipment’s power.
IMPORTANT! Never allow the battery packs to become fully
discharged as this will cause irreversible damage to the
batteries.
Push lock
button
Fig. 10
Charging the Batteries
1. Open the battery compartment cover, and push the push
lock buttons on the batteries to pull the battery packs out
from the battery compartment (Fig. 7).
2. Check that the mains voltage is the same as that marked
on the rating plate of the battery charger. Then, insert the
charger’s plug into the electrical wall outlet. When you
plug in the charger, two green lights will illuminate and stay
green (Fig. 8).
3. Place the battery packs into the charger by sliding the
packs to lock them into position. When you insert the
batteries into the charger, the two green lights will go
off, and the red lights will illuminate to indicate that the
batteries are charging (Fig. 9).
Fig. 7
Battery compartment cover
Battery packs
Charger
green
Power on
Fig. 8
Battery packs
red
Charging
green
Fully
Charged
Fig. 9
Loading ...
Loading ...
Loading ...