Loading ...
Loading ...
Loading ...
13
4. Rotate the auger to expose the other blade on the plate.
Follow the same instruction to remove it.
5. After all old blades are removed, follow the reverse order to
assemble the new blades. Use the original sets of hardware
to secure the blades on the auger.
Replacing Auger Belt
Tools Required (Not Provided):
• 10 mm wrench (2)
• Heavy duty gloves
1. Position unit on a hard, flat, smooth level surface, with the
batteries removed.
2. Use 2 10 mm wrenches to remove the bolts and nuts that
are used to fix the right side panel. Then remove the right
side panel to expose the belt, as shown (Fig. 24).
NOTE: The 2 bolts located on the left have 2 nuts on the back,
while the other 4 bolts don’t. Use one 10 mm wrench to hold the
left two bolts steady and remove the nuts with the other 10 mm
wrench first, and then remove all the bolts.
Blade to be
removed
Remove the 2 sets of
screws, washers and nuts
Fig. 23
Right side
panel
Bolts
Nuts
Old belt
Fig. 24
3. Remove the drive belt by slowly turning the auger pulley
counterclockwise while pulling the belt outwards (Fig. 25).
4. Install the new drive belt, rotating it onto the pulleys
(Fig. 26).
NOTE: Rotate the new drive belt first around the engine pulley,
then around the auger pulley. Slowly turn the auger pulley
clockwise to drive the belt inwards.
5. Replace the side panel on the unit, secure with the original
hardware. The snow blower is ready to use.
Storage
1. Examine the cordless snow blower thoroughly for worn,
loose or damaged parts. Should you need to repair or
replace a part, contact an authorized Snow Joe
®
+ Sun
Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1‑866‑SNOWJOE (1‑866‑766‑9563) for
assistance.
2. Clean the snow blower before storing or transporting.
Be sure to secure the unit while transporting.
3. Remove the battery packs from the cordless snow blower
before storing.
4. Store the cordless snow blower indoors in a locked, dry
place out of the reach of children to prevent unauthorized
use or damage.
Fig. 25
Drive belt
Auger pulley
New drive
belt
Auger pulley
Engine
pulley
Fig. 26
Loading ...
Loading ...
Loading ...