Loading ...
Loading ...
Loading ...
15
Troubleshooting
mWARNING! Always turn the tool OFF and remove the batteries before performing any adjustments, maintenance, or repairs
to your cordless snow blower.
Unit will not
start
The auger doesn't
rotate while the
motor is running
1. Batteries are flat.
2. Batteries are not locked in position.
3. The safety button is not depressed
1. Auger belt is wore out.
2. Auger belt is not assembled properly.
1. Charge the batteries.
2. Reinsert the batteries, and try to start the
machine again.
3. Depress the safety button, and pull the switch
bar lever.
1. Change the auger belt.
2. Check the auger belt, make sure it's assembled
tightely on the rail.
Problem Possible Cause Solution
Chute doesn't
rotate when
pressing the
button
1. There's no power.
2. Too much wet snow are accumulated
around the chute and preventing the
chute rotating.
1. Make sure the batteries are charged and locked in
position.
2. Clean the wet snow around the chute.
Snow left on
the ground after
cleaning
1. Worn out auger blades.
2. Worn out scraper bar.
1. Replace the blades.
2. Replace the scraper bar.
Loading ...
Loading ...
Loading ...