Loading ...
Loading ...
Loading ...
26
ENG
Figure 10 Figure 11 Figure 12
Cleaning Oven Glass
Lift by pressing on plastic latches on left and right side as shown in figure 10 and pulling the profile toward yourself
as in figure 11. Glass is released after profile is removed as shown in figure 12. Remove the released glass by
pulling toward yourself carefully. Outer glass is fixed to oven door profile. You can perform glass cleaning easily
after glasses are released. You can mount glasses back by performing the operations reversely after cleaning and
maintenance are completed. Ensure that profile is seated properly in place.
Catalytic Panel *
It is located behind the wire racks of the oven, at the right and left walls of oven cavity. Catalytic panel removes
offensive odour and provides using your appliance at its best performance. Over time, oil and food odours
permeate into enamelled oven walls and heating elements. Catalytic panel absorbs any food and oil odours, and
burns them during cooking to clean your oven.
Detaching catalytic panel
To remove catalytic panel; first remove the wire racks. Once wire racks are removed, catalytic panel will be free. It is
advised to replace the catalytic panel once every 2-3 years.
Rack Positions
It is important to place the wire grill into the oven
properly. Do not allow wire rack to touch rear wall of
the oven. Rack positions are shown in the next figure.
You may place a deep tray or a standard tray in the
lower and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first remove the lower, and than the upper
side from installation location. To install wire racks; reverse the procedure for removing wire rack.
Replacing Oven Lamp
WARNING!
To avoid electric shock, ensure that the appliance circuit is open before changing the lamp. (having circuit open
means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the left side. If you have difficulty in turning,
then using plastic gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same specifications.
Reinstall glass protection, plug the power cable of appliance into electrical socket and complete replacement.
Now you can use your oven.
Rack 4
Rack 3
Rack 2
Rack 1
Loading ...
Loading ...
Loading ...