Loading ...
Loading ...
Loading ...
24
ENG
1. Remove the power plug from electrical socket.
2. Do not clean inner parts, panel, trays and other parts of the product with hard tools such as bristle brush, wire
wool or knife. Do not use abrasive, scratching materials or detergent.
3. Rinse after wiping the parts at inner parts of the product with soapy cloth, then dry thoroughly with a soft cloth.
4. Clean glass surfaces with special glass cleaning material.
5. Do not clean your product with steam cleaners.
6. Never use combustibles like acid, thinner and gas while cleaning your product.
7. Do not wash any part of the product in dishwasher.
8. Use potassium stearate (soft soap) for dirt and stains.
MAINTENANCE AND CLEANING
Brightness setting:
Pressing and holding the
button for 3 seconds will result in the currenly valid brightness setting being showed.
By pressing
and buttons, you may scroll through 8 available brightness setting. The last seen brightness
setting will be automatically recorded as the selected setting. After 6 seconds of the last button press or by
pressing
, the adjustment is completed.
NOTE
• Default settings are highest.
• Programmable options are nonvolatile and will be resident after any power failure.
Steam Cleaning *
Figure 7
It enables cleaning the soils softened thanks to the steam to
be generated in the oven.
1. Remove all the accessories in the oven.
2. Pour a half litre of water into the tray and Place the tray
at the bottom of the boiler.
3. Set the switch to the steam cleaning mode.
4. Set the thermostat to 70 °C degrees and operate the
oven for 30 minutes.
5. After operating the oven for 30 minutes, open the oven
door and wipe the inner surfaces with a wet cloth.
6. Use dish-washing liquid, warm water and a soft cloth
for stubborn dirt, then dry off the area you have just
cleaned with a dry cloth.
Loading ...
Loading ...
Loading ...