Loading ...
Loading ...
Loading ...
Liquefied Petroleum (Propane) Gas Conversion
The cooktop can be used with Natural Gas or Propane Gas. It is shipped from the factory for usewith natural gas.
If you wish to convert your appliance for use with LP/Propane gas, usethe supplied fixed orifices located in a bag containing the
literature marked, "FOR LP/PROPANEGAS CONVERSION". Follow the instructions package with the orifices.
The conversion must be performed by a qualified service technician in accordance with the manufacturer's instructions and all
codes and requirements of the authority having jurisdiction. Failureto follow instructions could result in serious injury or property
damage. The qualified agency' performing this work assumes responsibility for the conversion.
Severe shock or damage to the appliance may occur if the appliance is not installed by a qualified installer.
Flame Size
For most cooking, start on the highest control setting and then turn to a lower one to complete
the process. Usea chart below asa guide for determining proper flame sizefor various types of
cooking. The size and type of utensil used and the amount of food being cooked will influence
tile setting needed for cooking.
Fordeep fatfrying, usea thermometer and adjust the surface control knob accordingly. If the
fat istoo cool, the food will absorb the fat and be greasy.Ifthe fat istoo hot, tile food will brown
so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at
once asthe food will neither brown or cook properly.
*Flame size
High Flame
Medium Flame
Low Flame
Type of Cooking
Start most foods; bring water to a boil; pan broiling.
Maintain a slow boil; thicken sauces, gravies; steam.
Keep foods cooking; poach; stew.
* These settings are based on using medium thickness aluminum pans with lids, Set-
tings may vary when using other types of pans.
Never extend tile flame
beyond tile outer edge of the
utensil. A higher flame simply
wastes heat and energy, and
increases your risk of being
burned by the flame.
Proper Burner Adjustments
The color of tile flame isthe key to proper burner adjustment. A good flame isclear, blue and hardly visible in a well-lighted room.
Each cone of flame should be steady and sharply defined. Adjust or clean burner if flame isyellow-orange. To clean burner, see
instructions under General Cleaning.
Loading ...
Loading ...
Loading ...